FoxGate S6016G POE, User Manual, Page: 26 / 27

45 46
4 . 10 QoS Management
On the QoS management/QoS Settings page, you can modify / 802.1 P QoS
function setting, as shown in figure 4-20.
The meaning of parameters in the page is shown in the following table.
Table 4-21 Main Parameter
Figure 4
-
20 802.1P QoS
Parameter Discription
QoS Setting
on/Off
On
/
Off QoS function, Default is Off
802
.
1P QoS
config
Traffic priority
，
802
.
1P define in 8 Priority
，
the highest
priority is 7
，
then to 6
、
5
、
4
、
3
、
2
、
1
、
0
802
.
1P Scope
Iidentify scopes is 0
、
1
、
2
、
3
、
4
、
5
、
6
、
7
，
Total 8 ID
，
0
As the default value
,
The absence of other priority value set
automatically enabled
Priority
Priority for 0 queue to queue, 7 , 7 queue as the highest
priority queue
Configuration guide
：
Example: Set ting ID 6
、
7 to Lowest queue.
The arrangement of equipment use for the WRR queue scheduling,
priority mode for the relative priority.Equipment in the default setting
priority 0 and 1 is mapped to the first priority queue. Namely the lowest
priority queue.Priority 2 and 3 mapped to the second priority queue.4 and
5 priority priority mapping to the third queue.6 and 7 mapped to the highest
priority priority queue is the highest priority queue.
Instruction
4 . 10 . 2 DSCP/TOS QoS
[QoS Setting
/
DSCP/TOS QoS] Interface
，
can modify the setting DSCP/TOS
QoS]
，
figure 4
-
21
[
The meaning of parameters in the page is shown in the following table
Table 4-22 Main Parameter Description
Parameter Description
DSCP/TOS QoS ON
/
OFF DSCP/TOS QoS , Default is Off
DSCP Scope TOS Identifies scope
，
Scope is 0
-
63
DSCP Priorty
TOS Priority, priority for zero queue to queue, 7 7 queue for
priority
Figure 4
-
21 DSCP
/
TOS QoS
Turn on QoS setting & 802.1P QoS Setting
；
802.1P ID scope Input 6-7
，
Priorty set line 0;
Click Settings
,
then save;
End of operation.
Configuration guide:
For example the id 0-16 is set to the highest queue
。
When start using 802.1P &DSCP/TOS QoS at the same time
，
DSCP/TOS
QoS Priority First
。
Instruction
Start using DSCP/TOS QoS configuration
；
In DSCP ID scope Input 1-10
，
DSCP Priority Choose the seventh queue
priority
；
Click Setting and save
End of operation.
4 . 10 . 1 QoS setting