FoxGate S6016G POE, User Manual, Page: 23 / 27

(1) If you forget your user name and password, please contact technical
support in order to get help.
(2) Set the same user name , only the top user / password could work.
(3) Web supports up to one administrator and two ordinary users,
administrators can not be deleted.
Caution
39 40
Multicast MAC address table is displayed in IGMP snooping table, all these
address tables are unicast addresses, The permanent static address is
configured in static MAC address port table. You need to modify
corresponding entries when the port changes. The aging time of MAC
address is 300s, after port disconnected , the upper port operation
procedures clear all correspond port entries.
The main parameter description are shown as the table
.
Table 4-16 Main parameter
Figure 4 - 15 IP address
4.8 System Management
4 . 8 . 1 IP Address
IP address is a 32 bit length address connected on Internet equipment. IP
address consist of two parts:
On this page, you can check the IP address and etc for this device, just shown in
figure 4-15.
Network-Id and Host-Id.
Parameter Description
Inquiry by physical
port
Enter detailed physical MAC address to check.
Inquiry by MAC
address type
MAC address type consists of static MAC address and
dynamic MAC address.
Caution
The description of main parameter as the table shown.
Table 4-17 Main parameter
Parameter Description
User Index
User index indicates the group of users, There are three user
indexes in drop down table.
Visit Level
Administrator: view and set all configuration.
User
:
some functions.
User Name
The identification of visitors
.
The combination of alphabet and
Chinese character
.
Input Password
Visitor password, the combination of alphabet and Chinese
character
.
Confirm
Password
P assword confirmed.
Users enjoy the permission rights of all functions except for “power
configuration”
,
delete all logs
,
update software and “restore factory
setting”
.
” “ ”
Instruction
ser management Figure 4-16 U
4.8.2 User Management
On this page
,
you could modify or add one user with password . as figure 4-16.
(1) We could set IP address range as 192.168.x.x,172.[16-31].x.x or
10.x.x.x
；
(2) Please fill in correct DNS address when using it for NTP and EMAIL.
Caution