REPLACING THE NOMAD
®
BATTERY PACK (P/N 600-200-400)
FOR NOMAD
®
NOW, N32, AND N56
|
APPROXIMATELY
4 MINS
Make sure the Nomad
®
is turned OFF before starting.
1. Begin with the back of the Nomad
®
facing you. Locate the eight (8) screws on
the rear panel.
2. Use a Phillips Head screwdriver to unscrew and remove the eight (8) screws.
Then, remove the rear panel.
3. Once the rear panel is removed, notice a black strap, which holds the Battery
Pack in place. There is one (1) screw on each side of the strap. Remove both
using the same Phillips Head screwdriver. This will then release the Battery
Pack strap.
4. Pull the Battery Pack out of the Nomad
®
Body. Then, detach it from the light
by unclipping the Connector.
FOR RE-INSTALLATION: Repeat steps 1–4 in reverse order.
CONNECTOR
1
3
2
4
1
2
3
4
