40
Chapter 3 BIOS Description
NF3250K8AA/NF3250GK8AA Series User Manual
continues. When you select the
“
V/H SYNC + Blank
”
mode the vertical and horizontal
scanning movement of screen stops when the computer enters power saving
mode.
“
DPMS Supported
”
mode is a new screen power management system,
and it needs to be supported by the monitor you
’
re using.
v
HDD Power Down (Default: Disabled)
This option is used to turn off hard disk power if the hard disk is idle for a given
period of time. The setting values are Disabled and 1Min-15Min.
v
HDD Down In Suspend (Default: Disabled)
This option is used to define the continuous HDD idle time before the HDD
enters power saving mode. The setting values are Disabled and Enabled.
v
Soft-Off by PBTN (Default: Instant-Off)
This option is used to set the power down method. This function is only valid
for systems using an ATX power supply. When
“
Instant-Off
”
is selected, press
the power switch to immediately turn off power. When
“
Delay 4 Sec.
”
is
selected, press and hold the power button for four seconds to turn off power.
v
Power-On by Alarm (Default: Disabled)
This option is used to enable or disable the feature of booting up the system
on a scheduled time/date. The setting values are Disabled and Enabled.
v
Date of Month Alarm
When the Power-On by Alarm set as
“
Enabled
”
, this option will be modified. It
is used to set the timing for the start-up date. The setting values contain 0 - 31.
v
Time (hh: mm: ss) Alarm
When the Power-On by Alarm set as
“
Enabled
”
, this option will be modified. It
is used to set the timing for the start-up date. The setting values contain hh: 0-
23; mm: 0-59; ss: 0-59.
