52
4
4. AlARM
Click "ALARM" button to trigger the warning events. It allows you to set the low/high limits of the
monitoring sensors. You can select a particular sensor to be watched carefully, or choose them
all.
If the monitoring value is lower than the low limit or higher than the high limit, and the Action
setting in CONFIG menu was set to "Ask Me", then you can hear buzzer sounds and the hazard
light is blinking. Click OK/Cancel button in the popped out HMW Alarm screen to acknowledge/
cancel the warning. If OK is pressed, the relative item will be displayed by red characters on the
"HWM INFO" screen.
Hazard light
