Foxconn MARS User Manual Download Page 37

Page: 37 / 110

onchip IDe Control

► SATA Mode

This item is used to set the Serial ATA Mode. Setting options: [IDE]; [RAID]; [AHCI].

The SATA interface is controlled by Intel® south bridge chip ICH9R.

► LEGACY Mode Support

There are Native IDE and Legacy (or compatible) IDE modes. Legacy mode supports OS

through legacy IDE driver. Most SATA functions are not supported in Legacy mode, like SATA

II 3G, NCQ, HotPlug and etc, and Native mode supports SATA II 3G, NCQ, and Hotplug.

This item is used to enable/disable the Legacy IDE mode support for the SATA ports. Certain

OS is not supported under Native mode, and must choose Legacy mode.

► Turbo Memory (Robson Technology) Support

Turbo Memory (Robson Technology) features an integrated disk cache using flash memory

in order to speed up disk access and also save energy. It uses non-volatile memory (Flash

memory) to increase system responsiveness, make multi-tasking faster, and extend battery

life.

This item is used for supporting the Turbo Memory.

► Onboard IDE/SATA Chip

You may set your PATA and e-SATA to IDE mode or RAID Mode or AHCI+IDE mode(AHCI for

e-SATA, IDE for PATA). We are using JMicron chip to control PATA and e-SATA devices.

► Delay For HDD (Secs)

You can select the delay for HDD while booting. It allows you to use your system with old

fashion type IDE devices which run slowly.

Phoenix - AwardBIOS CMOS Setup Utility

OnChip IDE Device

SATA Mode

IDE

Item Help

LEGACY Mode Support

Disabled

x Turbo Memory Support

Disabled

Menu Level ►

Onboard IDE/SATA Chip

IDE Mode

Delay For HDD (Secs)

↑↓→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults

IDE

Summary of Contents for MARS















































































































Search results

Summary of Contents for MARS

Reviews:

Related manuals for MARS

Brands by name

Popular brands

Foxconn MARS, User Manual

Search results

Summary of Contents for MARS

Reviews:

Related manuals for MARS

Brands by name

Popular brands