Foxconn MARS User Manual Download Page 105

Page: 105 / 110

2. Copy section 5-2, BIOS Configuration.

Shut down the computer, connect SATA hard disks to SATA ports, power on

computer again.

Press <Del> key, get into BIOS, set SATA mode to [RAID], press <F10> to save and

exit BIOS. PC will reboot.

3. Copy section 5-3, Create RAID in BIOS.

Press <CTRL><I> simultaneously to get into RAID BIOS set up (Intel

Matrix

Storage Manager option ROM utility).

Configure your new hard disks to RAID0, 1, 5 or 10. Exit RAID BIOS. PC will reboot.

4. The Windows XP is running again and a new hardware of RAID disk was found.

Click [Cancel] to skip this Wizard.

Phoenix - AwardBIOS CMOS Setup Utility

OnChip IDE Device

SATA Mode

IDE

Item Help

x LEGACY Mode Support

Disabled

x Turbo Memory Support

Disabled

Menu Level ►

Onboard IDE/SATA Chip

IDE Mode

Delay For HDD (Secs)

↑↓←→:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults

RAID

Click to exit.

Summary of Contents for MARS















































































































Search results

Summary of Contents for MARS

Reviews:

Related manuals for MARS

Brands by name

Popular brands

Foxconn MARS, User Manual

Search results

Summary of Contents for MARS

Reviews:

Related manuals for MARS

Brands by name

Popular brands