Chapter 2 Installation Instructions
14
Serial ATA II Connectors: SATA_1, SATA_2,
SATA_3, SATA_4; SATA_5, SATA_6
The Serial ATA II connector is used to connect
the Serial ATA II device to the motherboard. These
connectors support the thin Serial ATA II cables
for primary storage devices. The current Serial
ATA II interface allows up to 300MB/s data trans-
fer rate.
1
SATA_1/2/3/4/5/6
GND
GND
GND
RX +
RX-
TX -
T X +
Chassis Intruder Connector: INTR
The connector connects to the chassis security
switch on the case. The system can detect the
ch assis intru sion th ro ug h the status o f th is
connector. If the connector has been closed
once, the system will send a message.
INTR
1 INTRUDERJ
2 GND
Audio Connectors: AUX_IN
AUX_IN is Sony standard CD audio connectors,
it can be connected to a CD-ROM drive through
a CD audio cable.
AUX_IN
1
CD_R
GND
CD_L
COM Connector: COM2
This motherboard provides an additional serial
COM header for your machine.Connect one side
of a switching cable to the header, then attach
the serial COM device to the other side of the
cable.
COM2
SOUT
GND
RLSD
RI#
DTR#
DSR#
SIN
9
10
1
2
CTS#
RTS#
Empty
文件使用
"pdfFactory"
试用版本创建
www.fineprint.com.cn
