Foxconn FlamingBlade Page 112 User Manual Download

Page: 112 / 122

105

7. Depending on South Bridge chip of your system, select appropriate driver for it.

Here, we choose Intel

ICH8R/ICH9R/ICH10R SATA RAID Controller. Press <Enter>

to select it.

8. A confirmation message pops out to double check if the driver is really what we

wanted. Press <Enter> to continue.

Windows Setup

Setup will load support for the following mass storage device(s):

Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller

* To specify additional SCSI adapters, CD-ROM drivers, or special

disk controllers for use with Windows, including those for

which you have a device support disk from a mass storage device

manufacturer, press S.

* If you do not have any device support disks from a mass storage

device manufacturer, or do not want to specify additional

mass storage devices for use with Windows, press ENTER.

S=Specify Additional Device ENTER=Continue F3=Exit

Windows Setup

You have chosen to configure a SCSI Adapter for use with Windows,

using a device support disk provided by an adapter manufacturer.

Select the SCSI Adapter you want from the following list, or press ESC

to return to the previous screen.

ENTER=Select F3=Exit

Intel(R) ICH7R/DH SATA RAID Controller

Intel(R) ICH7MDH SATA RAID Controller

Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller

Intel(R) ICH8M-E/ICH9M-E SATA RAID Controller

Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller

Summary of Contents for FlamingBlade



























































































































Search results

Summary of Contents for FlamingBlade

Reviews:

Related manuals for FlamingBlade

Brands by name

Popular brands

Foxconn FlamingBlade, User Manual

Search results

Summary of Contents for FlamingBlade

Reviews:

Related manuals for FlamingBlade

Brands by name

Popular brands