Foxconn FlamingBlade Page 67 User Manual Download

Page: 67 / 122

3. overclocking

Click "Overclocking" icon to enter the overclok setting menu. It allows you to adjust CPU

clock, and to change the voltages of CPU, chipset and memory. After you set the values, click
[Apply] button to apply it.

4. oC Gear

Click “OC Gear” icon to open OC Gear dialog. It is support to read OC Gear from BIOS

setting to file and support to write OC Gear setting from file to BIOS.

Benefits

: the user only adjust overclocking once and save it in OC Gear function under BIOS

setup utility (click “DEL” key to enter BIOS setup utility when boot and select Quantum

BIOS item), then easier change many platform just be set by this file.

Save to file from BIOS Setting

Store to BIOS from file

Click these buttons to adjust
the CPU voltages

Apply the changes

Click these buttons to
adjust the CPU clock

Click these buttons
to adjust the PCIe
clock

Click these buttons to adjust
the Northbridge and Southbridge
voltage

Click these buttons
to adjust the memory
voltage

Summary of Contents for FlamingBlade



























































































































Search results

Summary of Contents for FlamingBlade

Reviews:

Related manuals for FlamingBlade

Brands by name

Popular brands

Foxconn FlamingBlade, User Manual

Search results

Summary of Contents for FlamingBlade

Reviews:

Related manuals for FlamingBlade

Brands by name

Popular brands