Foxconn A9DA Series User Manual Download Page 111

Page: 111 / 115

Appendix

104

3. Then you may use the ATI Catalyst(TM) Control Center.

Using an add-on graphics card

1. Right-click on the desktop, then click ATI Catalyst(TM) Control Center from the

shortcut menu. The ATI Catalyst(TM) Control Center screen appears.

2.Click “Graphics Settings-> CrossFire

™”,

then select the “Enable CrossFire™” check

box. When a confirmation message pops

up, click “Yes”. The screen blacks out for

about one minute.

3. Click “OK”. The add-on graphics card

is set to be the main monitor.

Using the onboard graphics card

1. Right-click on the desktop, and then click ATI Catalyst(TM) Control Center from

the shortcut menu. The Catalyst(TM) Control Center screen appears.

2. Click "Graphics Settings>CrossFire™”, then

clear the "Enable CrossFire™ "check box.

When a confirmation message pops up,

click "Yes". The screen backs out for about

one minute.

Click “OK”.

4.Right-click on the desktop, then click "Personalize" from the shortcut menu.

5. Click Display Settings. Select "[Default

Monitor] on ATI Radeon HD 3450 Graphics",

then select the check boxes of "This is my

main monitor" and "Extend the desktop onto

this monitor". Click "OK". and then "Yes" from

the confirmation window.

6. Restart the system. Right-click on the

desktop, then click ATI Catalyst(TM) Control

Center from the shortcut menu. The ATI

Catalyst(TM) Control Center screen appears

Summary of Contents for A9DA Series




















































































































Search results

Summary of Contents for A9DA Series

Reviews:

Related manuals for A9DA Series

Brands by name

Popular brands

Foxconn A9DA Series, User Manual

Search results

Summary of Contents for A9DA Series

Reviews:

Related manuals for A9DA Series

Brands by name

Popular brands