Foxconn A6GMV Series User Manual Download Page 29

Page: 29 / 76

Advanced BIOS Features

► IDE Detect Time Out

This item is used to select the time out value for detecting ATA/ATAPI devices. If the checking
time is over the set value, the system will skip it.

►Boot Settings Configuration

This option is used to select the priority for boot devices. After pressing <Enter>, you can
select the device using the Up/Down arrow keys, and change the device priority using <+> or
<->; you can exit this menu by pressing <Esc>.

► Quick Boot

While Enabled, this option allows BIOS to skip certain tests while booting, this will shorten the
time needed to boot the system.

► Quiet Boot

This item is used to enable/disable the quiet boot.

[Disabled] : Displays the normal POST messages.
[Enabled] : Displays OEM customer logo instead of POST messages.

► Bootup Num-Lock

This item defines if the keyboard Num Lock key is active when your system is started. The

available settings are: On (default) and Off.

Advanced BIOS Features

IDE Detect Time Out

[35]

Help Item

► Boot Settings Configuration

[Press Enter]

Quiet Boot

[Enabled] Select the time out

Quick Boot

[Enabled] value for detecting

Bootup Num-Lock

[On] ATA/ATAPI device(s).

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

[35]

Summary of Contents for A6GMV Series













































































Search results

Summary of Contents for A6GMV Series

Reviews:

Related manuals for A6GMV Series

Brands by name

Popular brands

Foxconn A6GMV Series, User Manual

Search results

Summary of Contents for A6GMV Series

Reviews:

Related manuals for A6GMV Series

Brands by name

Popular brands