Foxconn A6GMV Series User Manual Download Page 39

Page: 39 / 76

USB Configuration

► USB Controller

This item is used to enable or disable the Universal Host Controller Interface for USB.

► USB 2.0 EHCI Controller

This item is used to enable or disable the USB 2.0 EHCI Controller

► Legacy USB Support

This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.

► USB 2.0 Controller Mode

This item is used to set the transmission rate mode of USB 2.0. The available settings are :
[High Speed] in 480Mbps; [Full Speed] in 12Mbps.

USB Configuration

Help Item

Module Version - 2.24.2-13.4

USB Devices Enabled: Disabled

None

Enabled

USB Controller

[Enabled]

USB 2.0 EHCI Controller

[Enabled]

Legacy USB Suppprt

[Enabled]

USB 2.0 Controller Mode

[FullSpeed]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help

F9:Optimized Defaults

[Enabled]

Options

Summary of Contents for A6GMV Series













































































Search results

Summary of Contents for A6GMV Series

Reviews:

Related manuals for A6GMV Series

Brands by name

Popular brands

Foxconn A6GMV Series, User Manual

Search results

Summary of Contents for A6GMV Series

Reviews:

Related manuals for A6GMV Series

Brands by name

Popular brands