Chapter 3 BIOS Description
43
v
Wake up by PCI card
This option is used to set the system to wake up by PCI card. The setting
values are Disabled and Enabled.
v
Wake up by Ring
If this item is enable, it allows the system to resume from a software power
down or power saving mode whenever there is an incoming call to an
installed fax/modem. This function needs to be supported by the relevant
hardware and software. The setting values are Disabled and Enabled.
v
Wake Up On LAN
This option is used to set the system to wake up onboard Lan. The setting
values are: Disabled and Enabled.
v
USB KB Wake-Up From S3
This option is used to set the system to wake up by USB equipment when it is
in S3 (Suspend to RAM) mode. The setting values are: Disabled and Enabled.
v
Resume by Alarm
This option is used to set the timing of the start-up function. In order to use this
function, the start-up password function must be cancelled. Also, the PC power
source must not be turned off. The setting values are: Disabled and Enabled.
v
Date (of Month) Alarm
When the Resume by Alarm set as
“
Enabled
”
, this option will be modified. It is
used to set the timing for the start-up date. The setting values contain 0 - 31.
v
Time (hh:mm:ss) Alarm
When the Resume by Alarm set as
“
Enabled
”
, this option will be modified. It is
used to set the timing for the start-up time. The setting values contain hh:0
–
23; mm:0
–
59; ss:0
–
59.
Power Management Events Menu
