Foxconn 875A02 Manual Download Page 96

Page: 96 / 117

875A02 User Manual

Chapter 5 Directions for Bundled Software

SuperLogo

SuperLogo is a Windows utility that allows users to change the BIOS sign on
logo. The utility is able to replace and backup the BIOS logo, and update and
backup the BIOS image within the Windows environment.

SuperLogo features:

1. Supports Win2000 and WinXP.
2. Supports 4Mb size flash parts, flash write method is independent with flash

type.

3. Simple and easy to operate, with a user-friendly graphics interface.
4. Supports BMP and JPEG graphic format files. The best color is 16 or 256

colors. The best resolution is 136x84 for top-right logo and 640x480 or 800x600
for full screen logo.

Using the SuperLogo:

SuperLogo on-line Help

About SuperLogo

Go to ROM Info page

Display the Flash Information

Exit Program

Minimize Window

Link to Foxconn website

Summary of Contents for 875A02






















































































































Search results

Summary of Contents for 875A02

Reviews:

Related manuals for 875A02

Brands by name

Popular brands

Foxconn 875A02, Manual

Search results

Summary of Contents for 875A02

Reviews:

Related manuals for 875A02

Brands by name

Popular brands