66
Chapter 3 BIOS Description
875A02 User Manual
Load Optimized Defaults
Load Fail-Safe Defaults
Select this option to press Enter, it will pop out a dialogue box to allow you to
load default set by BIOS. Select <Y> and then press Enter to load default.
Select <N> and press Enter, it will not load. The defaults set by BIOS have
set the basic functions of system in order to ensure the stability of system.
But if your computer fails to properly run, you may load failure insurance
default to make the system recover normal, then carry out failure testing in
next step. If you only want to load the default in an option, you can select this
option and press the key F6.
Select this option and press Enter, it will pop out a dialogue box to let you
load the optimized defaults set by BIOS. Select <Y> and then press Enter to
load the optimized defaults. Select <N> and press Enter, it will not load. The
defaults set by BIOS have set the optimized performance parameters of
system to improve the performances of system components. But if the opti-
mized performance parameters to be set cannot be supported by your hard-
ware devices, it will cause system to make mistakes or not stable. If you only
want to load the optimized default in an option, you can select this option and
press the key F7.
Set Supervisor/User Password
The preferential grade of supervisor password is higher than user password.
You can use supervisor password to start into system or enter into CMOS
setting program to amend setting. You can also use user password to start
into system, or enter into CMOS setting menu to check, but if you have set
supervisor password, you cannot amend setting.
When you select Set Supervisor / User Password, it will appear the following
message in the center of screen, which will help you to set password.
Enter Password:
Enter your password, not exceeding 8 characters, then press <Enter>, the
password you have been enter now will replace the previous password.
When the system requires you to determine this password, you can enter
this password and press <Enter>.
If you do not need this setting, you can press <Enter> when the screen
prompts you to enter password, and the screen will appear the following
message to show this function invalid. In this case, you can freely enter into
system and CMOS setting program.
PASS WORD DISABLED!!!
Press any key to continue...
