Foxconn 875A02 Manual Download Page 12

Page: 12 / 117

Chapter 1 Product Introduction

875A02 User Manual

Expansion Slots:

5 PCI slots

1 AGP slot

AGP 8X support:

AGP 8X (AGP 3.0) is the VGA interface specification that enabled enhanced
graphics performance with high handwidth speeds up to 2.12 GB/s.

Advanced Features:

PCI 2.3 Specification Compliant

Supports Windows98/2000/ME/XP soft-off

Supports Wake-on-LAN function

Supports PC Health function (capable of monitoring system voltage, CPU,
system temperature, and fan speed)

Intel

Performance Acceleration Technology (PAT) :

The Intel

Performance Acceleration Technology deliver additional system-

level performance by optimizing memory access between CPU and system
memory on 800-MHz FSB and Dual Channel DDR400 configuration.

Attention:

Enabling the functionality of Hyper-Threading Technology for your com-
puter system requires all of the following platform components:

CPU: An Intel® Pentium® 4 Processor with HT Technology

Chipset: An Intel® Chipset that supports HT Technology

BIOS: a BIOS that supports HT Technology and has it enabled

O/S: An operating system that has optimizations for HT Technology

For more information go

www.intel.com/info/hyperthreading

Summary of Contents for 875A02






















































































































Search results

Summary of Contents for 875A02

Reviews:

Related manuals for 875A02

Brands by name

Popular brands

Foxconn 875A02, Manual

Search results

Summary of Contents for 875A02

Reviews:

Related manuals for 875A02

Brands by name

Popular brands