Foxcom SATLIGHT 7225H, Installation And User Manual

Page: 15 / 60

7225H Interfacility Link Installation and User’s Guide page 7
Foxcom proprietary information
2 Installation
The following section details how to install the 7225H Interfacility
Link units
3
. Setting up the 7225H Transmitter/Receiver consists:
2.1 Setting up the Transmitter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.2 Connecting the Fiber Optic Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.3 Setting Up the Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.3.1 Measuring the RF Signal Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.4 Powering the IFL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.4.1 7180M Chassis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.5 Connecting the Back Panel Jumpers . . . . . . . . . . . . . . . . . . . . . . . 13
2.6 Measuring the RF Signal Strength . . . . . . . . . . . . . . . . . . . . . . . . . 15
2.7 Aligning the Fiber Optic Link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Observe all warnings and cautions mentioned at the beginning of
this manual (See
Important Information
on page iii).
If after set-up you experience problems, see
Chapter 5: Troubleshooting
,
on page 29.
Figure 6 Typical Application of a 7225H Interfacility Link
3. This section gives instructions on installing the transmitter an ad
receiver in a chassis rackmount. For instructions on installing
standalone units see
Appendix 2 Installing a Standalone Unit
on page 35.