Foxcom SATLIGHT 7225H, Installation And User Manual

Page: 43 / 60

7225H Interfacility Link Installation and User’s Guide page 35
Foxcom proprietary information
Appendix 2 Installing a Standalone Unit
To install the 7225HT-STD or 7225HR-STD Standalone:
1. Place the 7225HIFL unit on the standalone flange, matching the
holes.
2. Using four screws (#4 or #6) secure the unit and the flange to the
wall.
3. Apply AC power to the standalone power supply unit.
4. Connect the 7225HD unit to the power supply. The Laser LED
should be lit.
All remaining steps are the same as in the product manual. See
sections
2.1 Setting up the Transmitter
on page 8 and
2.3 Setting Up the
Receiver
on page 10.