605-01-108 rev B
Pg. 10
Crossover ring
placement
value should
match the
distance from
the top of the
spring coupler
to the bottom of
the crossover
ring.
Example
.629 inches
You may need a small, flexible ruler or measuring device to accurately determine the crossover ring location.
Another useful way of measuring is to count the threads on the body (the thread pitch on the body is 14
threads per inch). If you know the crossover ring location, multiply by 14 to get the number of threads
between the spring coupler and crossover ring. In the example above, 0.629 inches = 0.629 x 14 = 8.8
threads.
Changing the spring preload, tender or main spring free-length or rate will mean that you need to reset
the crossover ring placement.
STEP 6
Adjust the crossover (as shown on the previous page) so that its distance from the spring coupler is
equal to the crossover ring placement value calculated in Step 5. Lock the crossover rings together
once complete with flat-bladed screwdriver and hammer.
STEP 7
Remove the UTV from the stand.
.629”
