4
parts. Non-slip shoes are particularly recommended when working outside. Keep long hair tied up.
9.
Always wear safety glasses. Also wear a mask if operating the machine creates dust.
10.
Do not mistreat the power cord. Never use the power cord to pull out the plug. Keep the power cord away from
heat, oil and sharp edges.
11.
Do not bend over the machine. Keep your balance at all times.
12.
Keep tools in good condition. Clean tools to obtain the best results with them. Follow instructions to grease
and change accessories. Regularly check the power cord and replace it if damaged. Keep handles dry, clean
and free from oil and grease.
13.
Disconnect the tool when not in use, before the maintenance and while changing accessories such as blades,
drills, etc.
14.
Remove all maintenance tools. Get used to checking that all maintenance tools are removed before using the
machine.
15.
Avoid accidentally starting the machine. Make sure that the switch is in the "OFF" position before connecting the
power.
16.
When the tool is used outside, use only extension leads designed for outdoor use.
17.
Be observant. Use common sense when operating machinery. Do not use the tool when tired.
18.
Inspect parts before use. Before continuing to use the tool, inspect any protective parts) which could be
damaged to make sure that they work well. Verify that the moving parts are properly aligned, and are not
jammed or broken. Check the assembly and any other conditions which may affect the correct functioning of the
machine. Any damaged part or guard must be repaired or replaced by an approved after-sales service centre.
Do not use the tool if the switch does not work correctly.
19.
Warning: the use of any non-recommended accessory can present a health risk.
20.
Have the machine repaired by a qualified person. This machine is built according to relevant safety
requirements. Repairs must only be made by a qualified person using original spare parts, otherwise it may be
very dangerous for the user.
21.
Keep these instructions.
