15. Once the stock coil-over is removed,
you can now install your new FOX coil-
over. With remote reservoir models,
make sure that the hoses are facing
outward and towards the front of the
vehicle (Figure 7). Connect the coil-
over top hat to the vehicle with the
provided washers and nuts. Tighten all
three nuts to 24 FT-LBS.
16. Connect the coil-over to the lower
control arm using the supplied 19mm
bolts and washers. Torque to 50 FT-LBS.
12. Remove the top (3) nuts that secure
the top of the stock coil-over assembly
to the vehicle. DO NOT remove center
nut; doing so will release the spring
from the stock assembly and could
result in SERIOUS INJURY or DEATH!
13. Remove the (2) lower coil-over nuts
connecting the shock to the lower
control arm.
14. You can now remove the stock coil-over
from the vehicle.
Figure 6: Passenger side shown
Figure 7: Passenger side shown
1.800.FOX.SHOX (369.7469) 619.768.1800 [email protected]
5