28
Instructions
Front Frame Middle Height Adjustment
1. The height of the suction foot in the middle of the front frame can be adjusted according to the curved surface of the roof, so that the three
suction feet can fit the roof as much as possible.
2. To adjust the method, disconnect the white hose quick connector as shown in Figure XIII-Ⅰ.
3. Rotate the middle suction foot height as shown in Figure XIII-Ⅱ. The suction feet swing back and forth to accommodate the curved surface of
the roof. After adjusting the height, there is no need to lock it.
4. Adjust to the appropriate height and connect the hose quick connector.
5. Front and rear frame p
neumatic
hose connection: The p
neumatic
hose can be connected to the rear frame from the inside of the luggage. The
p
neumatic
hose inside the luggage needs to be protected by a corrugated pipe as shown in the Figure XIV. When placing items, try to avoid
pressing the p
neumatic
hose to cause the p
neumatic
hose to be blocked or damaged.
Unscrew the interface
Rotate the suction foot to adjust the height to fit the curved surface of the roof
Figure XIII-Ⅱ
Figure XIV
Figure XIII-Ⅰ