Figure Ⅴ
Figure Ⅵ
Figure Ⅶ
Tie with nylon ties
Forward
Backward
25
Sedan rear rack installation
1. Install the rear suction feet group and the
triangle
together, as shown in Figure Ⅴ (the left and right directions of the
triangle
have the LOGO
facing outward, and the
triangle
faces the same as Figure Ⅶ). Two spacers need to be placed at the connection to avoid shaking due to
excessive clearance.
2. Install the rear suction feet group with the
triangle
installed on the rear frame, as shown in Figure Ⅵ, place the anti-loose speacer on the
installation place to prevent loosening, and tighten the screws.
3. The
pneumatic hose
under the front frame and the rear frame should be fixed with the pipe fixing buckle as shown in Figure Ⅱ, and the pipe
fixing buckle on the
triangle
should be fastened with nylon cable ties as shown in Figure Ⅶ.
4. After the rear suction feet group is installed, connect the
pneumatic hose
on the rear frame to the joint of the suction feet group as shown in
Figure Ⅲ.
Note: During installation, the control box switch and the
pneumatic hose
on the suction feet group face the rear of the vehicle, as shown in
Figure Ⅳ.
Instructions
The installation is complete