Figure Ⅰ
Figure Ⅱ
Figure Ⅲ
Figure Ⅳ
This product is divided into hatchback version and sedan version, please install it according to the instruction manual of
the purchased product.
Hatchback rear frame installation
1. Install the suction feet group on the rear text, and tighten the screws as shown in Figure Ⅰ. Two spacers should be placed at the connection
to avoid shaking due to excessive clearance.
2. The
pneumatic hose
under the front frame and the rear frame text need to be fixed with pipe fixing buckles, as shown in Figure Ⅱ.
3. After the rear suction feet group is installed, connect the
pneumatic hose
on the rear frame to the joint of the rear suction feet group as shown
in Figure Ⅲ.
Note: During installation, the control box switch and the
pneumatic hose
on the suction feet group
face the rear of the vehicle, as shown in Figure Ⅳ.
The
pneumatic hose
towards the rear of the
vehicle
Fixed pneumatic hose
24
Instructions