12
WARNING
The MOTORS can be switched off in the following ways:
- In “manual”, the motors stop when the “MANUAL” button is released;
- In “automatic”, the motors stop when the FLOAT SWITCH are no longer
enabled or when the current protection is actives, or by pushing the “0 –
RESET” button;
- Turning the general switch with door interlock to “0”.
INDICATES THAT THE MAIN POWER IS ON ( GREEN LIGHT )
INDICATES THAT THE ALARM LEVEL IS ON ( RED LIGHT )
INDICATES THAT THE MOTOR IS RUNNING ( GREEN LIGHT )
CONTEMPORARY LIGHTING INDICATES THAT THE OVERLOAD
PROTECTION IS ON ( RED LIGHTS )
INDICATES THAT THE CLICSON THERMAL PROTECTIONS IS ON ( RED LIGHT )
KEEPING IT SWITCHED, THE MOTOR STARTS, EVERY ALARM IS BY-PASSED.
WHEN IT IS RELEASED THE MOTOR GET DISCONNECTED.
PUSH TO DISCONNECT THE MOTOR AND RESET THE ACTIVE PROTECTIONS.
WHEN PUSHED, THE AUTOMATIC MODE IS ACTIVATED WHICH IS INDICATED BY
THE GREEN LED; THE BOARD IS READY TO RECEIVE SIGNALS FROM THE
FLOATS SWITCHES or PRESSURE SWITCHES.
9. STOP OF THE PUMPS
10. LIGHTS and PUSH-BUTTONS ON THE FRONT-PANEL
