2
1
OPERATION
AUXILIARY INPUT
The unit can be connected to a portable
audio player through the
AUX IN
jack (10).
And press MODE button (3) to select
AUX
IN
mode when inserted an audio source to
the unit.
RADIO OPERATION
SWITCHING TO RADIO MODE
Press
MODE
button (3) to select radio
mode, the radio mode appears in the
display together with the memory band
and frequency.
SELECTING THE RADIO BAND
At radio mode, press
BAND
button (4)
shortly to select the desired band.
The reception band will change in the
following order:
→FM1→ FM2→ FM3
SELECTING STATION
Press
button (17) or
button (6)
shortly to activate automatic seek
function. It will search up/down a
station automatically. Press for 2
seconds until “
MANUAL
” appears on
the display, the manual tuning mode is
selected. In this mode you can turn
up/down a step
frequency one by one till searched a
station. If both buttons have not been
pressed for 5 seconds, it will return to
seek tuning mode and “
AUTO
”
appears on the display.
-
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press
AS/PS
button (2) for 2
seconds, the radio searches from the
87.5MHz
frequency and checks the signal
strength until one cycle search is
finished. And then some strong
stations
are
stored
into
the
corresponding preset number button.
- Program scanning
Press
AS/PS
button (2) shortly to
scan preset station. The radio is
holding at that preset number for
several seconds with release mute,
then searches again.
MANUALLY STORE STATION &
RECALL PRESET STATION
To received a station, Press one of the
preset button (12~17) for 2 seconds.
The current station is stored into the
number button. Shortly press the preset
button (12~17) to directly listen the
station that saved in the corresponding
preset button.
RDS (RADIO DATA SYSTEM)
OPERATION
Setting RDS mode
Press and hold
SEL
button into the
RDS menu. It will show AF on the
display. Rotating audio knob (6) to
switch to on or off.
Whenever AF
is on, symbol “
AF
”
appears on the display.
Program name is displayed on
receiving a RDS station.
“
AF
” starts blinking if the broadcasting
signal getting worse.
Listening to Traffic Announcement
In TA item of the RDS menu. Rotating
the audio knob (6) to turn on/off the TA
function. When
TA
mode is on and a
traffic announcement is transmitted:
When the unit was in MP3 or AUX IN
mode, it will switch temporarily to radio
mode.
When
TA
mode is on,
TA
of individual
segment is turned on. When a TP
station is received, TP of individual
21
Summary of Contents for 4-MP100
Page 5: ...5 JOHTOJEN KYTKENT...
