manualshive.com logo in svg

Four winns V Series, Owner'S Manual

The Philips V Series product offers exceptional features and advanced technology. Enhance your user experience with our comprehensive User Manual, available for free download on our website. Explore the full potential of your device and discover its capabilities, effortlessly accessing the manual from manualshive.com.

Share
Download
background image

Table of Contents

Owner’s Manual Page 3

WARRANTY AND SERVICE

 ..........................................................................................................................  47

D - 1  FOUR WINNS WARRANTY POLICY ..........................................................................................  47

D - 2  DECK/HULL STRUCTURE WARRANTY ....................................................................................  47

D - 3  WARRANTY REGISTRATION ....................................................................................................  47

D - 4  TRANSFER OF WARRANTY  .....................................................................................................  47

D - 5  PRE-OWNED UNIT REGISTRATION .........................................................................................  47

D - 6  INSURANCE COVERAGE ..........................................................................................................  48

D - 7  SERIAL NUMBER RECORD .......................................................................................................  48

D - 8  PRE-DELIVERY SERVICE ..........................................................................................................  48

D - 9  REPLACEMENT PARTS .............................................................................................................  48

D - 10  OWNER’S RESPONSIBILITIES ..................................................................................................  48

D - 11  CONSTRUCTION STANDARDS .................................................................................................  49

D - 12  WINNGEAR .................................................................................................................................  49

 

 

NAME/ADDRESS CHANGE FORM ............................................................................................  51

 

 

WARRANTY REGISTRATION TRANSFER REQUEST ..............................................................  53

ENGINES, DRIVES AND INSTRUMENTATION

 .............................................................................................  55

E - 1 

GENERAL ...................................................................................................................................  55

E - 2 

ENGINE EXHAUST .....................................................................................................................  55

A  Carbon Monoxide ..................................................................................................................  55

B  Carbon Monoxide Monitors ...................................................................................................  56

 E - 3  ENGINES & DRIVE SYSTEM .....................................................................................................  57

A Engine ...................................................................................................................................  57

B.  Stern Drives ..........................................................................................................................  57

C.  Inboards V-drives ..................................................................................................................  57

D.  Volvo Penta IPS Drive - Units ................................................................................................  57

E - 4 

PROPELLERS ............................................................................................................................  58

A. Diameter ...............................................................................................................................  58

B. Pitch ......................................................................................................................................  58

C.  Prop Slip  ..............................................................................................................................  58

E - 5 

ENGINE COOLING SYSTEMS ...................................................................................................  59

A.  Raw Water Cooling ...............................................................................................................  59

B.  Fresh Water Cooling  ............................................................................................................  59

E - 5 

RUNNING ANGLE & POWER TRIM/TILT .....................................................................................60

A.  Power Trim ..............................................................................................................................60

B.  Power Tilt ................................................................................................................................61

E - 7 

TRIM TABS ...................................................................................................................................61

A.  Control Listing  ........................................................................................................................61 

B.  Induce Planning & Controlling Trim Angle .............................................................................  62

C.  Trim Tab Maintenance  .........................................................................................................  62

E - 8 

ENGINE INSTRUMENTATION ...................................................................................................  62

A.  Tachometer/Hour Meter Combination Gauge ..........................................................................63

B. Speedometer ..........................................................................................................................64

C.  Temperature Gauge ................................................................................................................64

D.  Oil Pressure Gauge .................................................................................................................64

E. Voltmeter .................................................................................................................................64

F.  Fuel Gauge .............................................................................................................................64

G.  Power Trim Gauge ..................................................................................................................65

H.  Gas Vapor Detector ................................................................................................................65

I.  Engine Hour Meter ..................................................................................................................65

J.  Three Position Ignition Switch .................................................................................................65

K.  Four Position Ignition Switch ...................................................................................................65

Summary of Contents for V Series
























































































































































































































Reviews:

No comments

Related manuals for V Series

Yamaha FX140 Owner'S Manual preview
FX140
Brand: Yamaha Pages: 136
Maxum 1800MX Owner'S Manual preview
1800MX
Brand: Maxum Pages: 96
Traxxas Spartan 57076-1 Owner'S Manual preview
Spartan 57076-1
Brand: Traxxas Pages: 30
Hobie 16 Owner'S Manual preview
16
Brand: Hobie Pages: 36
PURSUIT Denali 28 Owner'S Manual preview
Denali 28
Brand: PURSUIT Pages: 148
Supra Launch 21V Owner'S Manual preview
Launch 21V
Brand: Supra Pages: 92
Supra 2007 Comp 20 Owner'S Manual preview
2007 Comp 20
Brand: Supra Pages: 88
Sea-doo XP5662 Operator'S Manual preview
XP5662
Brand: Sea-doo Pages: 7
Sea-doo LRV 5688 Operator'S Manual preview
LRV 5688
Brand: Sea-doo Pages: 71
Tiara Yachts FLYBRIDGE 53 2019 Owner'S Manual preview
FLYBRIDGE 53 2019
Brand: Tiara Yachts Pages: 172
Alliaura Marine Feeling 39 Owner'S Manual preview
Feeling 39
Brand: Alliaura Marine Pages: 44
Hansa Sailing 303 Operation & Safety Manual preview
303
Brand: Hansa Sailing Pages: 7
Polaris Genesis 2000 Service Manual preview
Genesis 2000
Brand: Polaris Pages: 331
Gumotex ALFONSO User Manual preview
ALFONSO
Brand: Gumotex Pages: 52
FAREAST S/V14 Manual preview
S/V14
Brand: FAREAST Pages: 18
Nautiraid GRAND NARAK 550 Instruction Book preview
GRAND NARAK 550
Brand: Nautiraid Pages: 12
Nautiraid RAID 325 Instruction Book preview
RAID 325
Brand: Nautiraid Pages: 16
Jeanneau SUN ODYSSEY 42 DS Information & Operations Manual For preview
SUN ODYSSEY 42 DS
Brand: Jeanneau Pages: 30

Brands by name

Popular brands

Load more brands