manualshive.com logo in svg

Four winns V Series, Owner'S Manual

Share
Download
Four winns V Series Owner'S Manual Download Page 172

Owner’s Manual Page 170

Fiberglass & Hull Information - Section P

P - 1  HULL DESIGN INFORMATION

Four Winns

®

 boats are designed using the sound 

engineering and mathematical prin ciples of hydro-

statics, hydrodynamics, structure, and strength of 

materials. The materials utilized provide optimum 

strength at the lightest possible weight. The exact 

fiberglass laminate schedule and construction tech-

niques of each part is deter mined in ac cor dance  

with the strength and rigidity re quired.

P - 2  FIBERGLASS CON STRUCTION

The fiberglass components of Four Winns

®

 boats  

are of the finest quality materials, work manship and 

construction techniques avail able. This en sures the 

structural integrity to provide years of boating enjoy-

ment with minimal mainte n ance.

The construction of a Four Winns

®

 hull be gins with  

the application of gel coat to the mold. The gel coat  

is approximately 25 mils thick. A coat of resin and 

chopped fiberglass is then sprayed into the hull and 

carefully hand rolled until it is se curely affixed to the 

gel coat.

A number of fiberglass layers and woven roving are 

applied to the above laminate. Each layer is hand laid 

and hand rolled. The keel and chine areas have 

fiberglass woven roving overlapped in these areas to 

provide additional strength. Most V Series models 

utilize encapsulated end-grain balsa core or coremat 

laminates to achieve additional rigidi ty. Others utilize 

ad ditional laminations of woven roving to main tain 

strength and rigidity.

The hull support stringers are located using spe cial 

tools, and are fiberglassed and/or bonded into place. 

This en sures a strong, rigid hull, permanently formed 

into a solid as sembly, free of distor tions.

Fiberglass cockpit liners and seat base are construct-

ed similar to the hull. Balsa core or coremat lamina-

tions are utilized when necessary.

In addition to a thorough visual inspection of each 

fiberglass component, samples are mea sured using 

special equipment, for fiberglass reinforce ment to 

resin ratio, laminate configura tion, weight and thick-

ness. By these procedures Four Winns ensures 

proper  com position.

P - 3  EQUIPMENT INSTALLATION

Many boats are used for specific purposes or under 

conditions which require the ad dition of special 

equipment to the hull or deck. Special care must be 

taken during the installation of any equi pment to a 

fiberglass com ponent. A polysulfide or butyl based 

sealant should be used to seal installations below the 

water line. Silicone “marine” seal or similar bed ding 

compound should be used elsewhere.

NOTICE

DO NOT in stall any item on to or through the 

hull without adequately sealing the hull area 

penetrat ed by the installed item or related 

fas teners. Improper instal lations could cause 

leakage or allow water ab sorption and thus 

cause serious hull dam age.

Always pre-drill fastening holes with a proper 

size bit. Pre-drilling will help pre vent the 

fiber glass from splintering and thus causing 

unsightly dam age. Also, countersink holes to 

prevent the gel coat from chipping.

Any equipment which will be subjected to cyclic 

loading or significant force should be through-bolted  

to a fiberglass compo nent. A butt block or backing 

plate should be used to strengthen any area onto 

which an item will be mounted.

P - 4  FIBERGLASS CARE & MAINTENANCE

Fiberglass is affected by weathering processes and 

requires maintenance on a periodic basis to help 

maintain the beauty and shine. The effects upon the 

gel coat will be dependent upon boating conditions, 

storage, type of use, and the care given to the boat 

during the boating season.

Four Winns utilizes fade-fighting gel coat in the 

exterior finish. It is specially formulat ed to resist fading 

and yellowing, and retain more of its original gloss 

than better grade gel coats. However, it is still impor-

tant to maintain the gel coat to protect the finish.

A.  Gen eral  Mai nte n ance

For fresh water use, the boat should be washed once 

or twice a month. When using in a salt water environ-

ment, considerably more care will be necessary. Be 

careful when selecting a cleaning agent. Hand dish 

Fiberglass and Hull

Summary of Contents for V Series
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands