manualshive.com logo in svg

Four winns V Series, Owner'S Manual

Share
Download
Four winns V Series Owner'S Manual Download Page 119

Owner’s Manual Page 117

Fuel Systems - Section I

d.  On the DC cabin panel place the HELM MAIN 

and CABIN MAIN breaker switches to OFF 

position.

3.  Before starting to fuel:

a.  Ensure that boat is moored securely.

b.  Close all ports, windows, doors and hatch es.

c.  Be sure the proper type and grade of fuel 

as recommended by your engine manual is 

used.

d.  Know the capacity of your fuel tank and how 

much fuel is currently in the tank before fuel-

ing. Determine how much additional fuel is 

required to avoid overflow.

4.  During fueling:

  Keep the fill nozzle in contact with the fuel opening 

at all times to guard against possible static spark 

or spill. See Figure I20.

(Nozzle in contact with fuel opening - Correct)

(Nozzle not in contact with fuel opening - Incorrect)

Figure I20: Grounding Fuel Hose

Avoid overboard spills. Be alert. The fuel nozzle 

should automatically shut off when using an 

automatic shut off nozzle. Be ready in the event 

it does not or if you are using a different type of 

nozzle for dispensing fuel. 

DO NOT TOP OFF.

Diesel & Export Models

Avoid overboard spills. When tank is almost full 

the sound from the fuel fill/vent will change. The 

pitch will become higher indicating the tank is 

close to being full. Stop pumping fuel into tank. 

DO NOT TOP OFF.

5.  After fueling:

a.  Replace all fill caps securely.

b.  Wipe up any spilled fuel.

c.  Open all ports, windows, doors and hatch es.

e.  Determine that there is no odor of fuel  

in the engine compartment or below decks 

before starting machinery, turning on lights  

or lighting stove. Oper ate the bilge blower 

system for at least four (4) minutes before 

engine start-up.

f.  Be prepared to cast off moorings as soon  

as engines are started.

Summary of Contents for V Series
























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands