PATIO COVER INSTRUCTION SHEETS
PATIO COVER INSTRUCTION SHEETS
LifeRoom Optima Installation Guide
STEP 9A: Attaching Side Fascia
With assistance, hold the Side Fascia
against the house and Front Fascia.
Check to see if you need to trim the
Side Fascia at an angle to fit tightly
against the wall or house fascia.
STEP 9B:
Cut and test fit the Side
Fascia against the house wall or fascia.
With a pencil, trace the Front Fascia
onto the Side Fascia, and then cut the
Side Fascia to fit.
STEP 9C:
Set the Side Fascia top leg
onto the Hanging Channel at the house
end. Mate and fasten the Side Fascia and
Front Fascia as shown.
STEP 9D:
Fasten through the side of
the Side Fascia into the Male or Female
sides of the Roof Panel. Continue with
24” spacing. Caulk the inside corner
joint of the Front Fascia and Side Fascia
heavily with the sealant, and then stuff
in the Fascia Dam and caulk again.
