F8X36 Series Router
User Manual
3.3.9.2 ZigBee Application
Enable ZigBee
：
Enable or disable ZigBee function
ZigBee Baudrate:
zigbee communicate baudrate
Pan ID:
zigbee communicate network id, input value must between 0~65535
Node Type:
3 kinds:Coordinator
、
Route
、
Terminal
Node ID:
input value must between 0~65535,the identification number for unique identification
of the device itself
Work Mode:
3 kinds, Broadcast
、
Master
、
API(Data format reference to Appendix A at the end of
document)
Through Address:
ZigBee Transmission node number of the target device, the operating mode to
the broadcast 65535. Operating mode must be set to the API set entry is
invalid, the transfer destination address is determined by custom packet
RF Channel:
ZigBee RF Channel, support 16 channels: 11~26
ZigBee receive interval:
Each time it receives a packet by zigbee, the longest wait for the timeout,
in milliseconds, the input value must be in the range 1 to 999
Communicate Mode:
Equipment transmission conversion: to support communication between
ZigBee and serial port, network forwarding combination; Notice: about
the serial’s communicate parameter setting must trun on “serial
applicaion” web page setting
