F8X36 Series Router
User Manual
Installation of antenna:
Screw the SMA male pin of the cellular antenna to the female SMA interface of the router
with sign “ANT”.
Screw the SMA male pin of the ZigBee antenna to the female SMA interface of the router
with sign “ZigBee”.
Screw the SMA female pin of the WIFI antenna to the male SMA interface of the router with
sign “WIFI”.
Warning: The cellular antenna, the ZigBee antenna and the WIFI antenna can not be
connected wrongly. And the antennas must be screwed tightly, or the signal quality of antenna will
be influenced!
Installation of cable:
Insert one end of the network cable into the Local network interface , and insert the other end
into the Ethernet interface of user’s device. The signal connection of network direct cable is as
follows:
RJ45-1
RJ45-2
Color
1
1
White/Orange
2
2
Orange
3
3
White/Green
4
4
Blue
5
5
White/Blue
6
6
Green
7
7
White/Brown
8
8
Brown
Insert the RJ45 end of the console cable into console interface, and insert the DB9F end of
the console cable into the RS232 serial interface of user’s device.
The signal connection of the console cable is as follows:
