F3X36 Series Router
User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 35 of 85
Add
:
J1-J3, 3
rd
Floor, No.44, Guanri Road, Software Park, Xiamen .361008.China
http://www.four-faith.com
Tel
:
+86-592-6300320 Fax
:
+86-592-5912735
Wireless Network
:
“Eanble”, radio on.
“Disable”, radio off.
Wireless Mode
:
AP, Client, Adhoc, Repeater, Repeater Bridge four options
。
Wireless Network Mode
:
Mixed
:
Support 802.11b, 802.11g, 802.11n wireless devices.
BG-Mixed
:
Support 802.11b, 802.11g wireless devices.
B-only
:
Only supports the 802.11b standard wireless devices.
B-only
:
Only supports the 802.11b standard wireless devices.
G-only
:
Only supports the 802.11g standard wireless devices.
NG-Mixed
:
Support 802.11g, 802.11n wireless devices.
N-only
:
Only supports the 802.11g standard wireless devices.
8021.11n Transmission Mode
:
In the wireless network mode to "N-only" choose to
transfer its transmission mode.
Greenfield:
When you determine the surrounding environment, there is no other
802.11a/b/g devices use the same channel, use this mode to increase throughput. Other
802.11a/b/g devices use the same channel in the environment, the information you send
may generate an error, re-issued.
Mixed
:
This mode is contrary to the green mode, but will reduce the throughput.
Wireless Network Name(SSID)
: The SSID is the network name shared among all
devices in a wireless network. The SSID must be identical for all devices in the wireless
network. It is case-sensitive and must not exceed 32 alphanumeric characters, which may
be any keyboard character. Make sure this setting is the same for all devices in your
wireless network.
。
Wireless Channel
:
A total of 1-13 channels to choose more than one wireless device
environment, please try to avoid using the same channel with other devices.
。
Channel Width
:
20MHZ and 40MHZ
。
Extension Channel
:
Channel for 40MHZ, you can choose upper or lower.
Wireless SSID Broadcast
:
Enable
:
SSID broadcasting.
Disable
:
Hidden SSID.
Network Configuration
:
Bridged
:
Bridge to the Router, under normal circumstances, please select the bridge.
Unbridged
:
There is no bridge to the Router, IP addresses need to manually
configure.
Virtual Interfaces
:
Click Add to add a virtual interface. Add successfully, click on the