F3X46 Series Router User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 30 of 87
Add
：
J1-J3,3
rd
Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China
http
：
//www.fourfaith.com
Tel
：
+86 592-6300466 6300465 6300464
Fax
：
+86 592-5912735
Dynamic Routing enables the router to automatically adjust to physical changes in the network's
layout and exchange routing tables with other routers. The router determines the network packets’
route based on the fewest number of hops between the source and destination.
To enable the Dynamic Routing feature for the WAN side, select WAN. To enable this feature for
the LAN and wireless side, select LAN&WLAN. To enable the feature for both the WAN and
LAN, select Both. To disable the Dynamic Routing feature for all data transmissions, keep the
default setting, Disable.
Note
：
Dynamic Routing is not available in Gateway mode
Static Routing
Select set number:
1-50
Route Name:
defined routing name by users, up to 25 characters
Metric:
0-9999
Destination LAN NET:
the Destination IP Address is the address of the network or host to which
users want to assign a static route
Subnet Mask:
the Subnet Mask determines which portion of an IP address is the network portion,
and which portion is the host portion
Gateway:
IP address of the gateway device that allows for contact between the router and the
network or host.
Interface:
indicate users whether the Destination IP Address is on the LAN & WLAN (internal
wired and wireless networks), the WAN (Internet), or Loopback (a dummy network in which one
PC acts like a network, necessary for certain software programs)
Show Routing Table
