Four-Faith F2816 V2 User Manual Download

Page: 10 / 56

Page 10 of 56



High-powered industrial cellular module



High-powered industrial 32 bits CPU



Support low power consumption mode, including multi-sleep and trigger modes to reduce the
power consumption



Housing: iron, providing IP30 protection.



Power range: DC 5~36V

Stability and Reliability



Support hardware and software WDT



Support auto recovery mechanism, including online detect, auto redial when offline to make
it always online



RS232/RS485/RS422 port: 15KV ESD protection



SIM/UIM port: 15KV ESD protection



Power port: reverse-voltage and overvoltage protection



Antenna port: lightning protection(optional)

Standard and Convenience



Adopt terminal block interface, convenient for industrial application



Support standard RS232 and RS485(RS422 optional) port that can connect to serial devices
directly



TTL logic level RS232 interface can be customized



Support intellectual mode, enter communication state automatically when powered



Provide management software for remote management



Support several work modes



Convenient configuration and maintenance interface

High-performance



Support TCP server and support multi TCP client connection(optional)



Support double data centers, one main and another backup



Supply 3 I/O channels, including 1 analog input(4-20mA) and 2 digital input/output



Support multi data centers and it can support 5 data centers at the same time



Support multi online trigger ways, including SMS, ring and data



Support domain name and IP address as data center



Design with standard TCP/IP protocol stack



Support private APN

1.3 Working Principle



The principle chart of the IP MODEM is as following.

Summary of Contents for F2816 V2

























































Search results

Summary of Contents for F2816 V2

Reviews:

Related manuals for F2816 V2

Brands by name

Popular brands

Four-Faith F2816 V2, User Manual

Search results

Summary of Contents for F2816 V2

Reviews:

Related manuals for F2816 V2

Brands by name

Popular brands