F-DPU100 Distributed Processing Unit User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 67 of 86
Add: 11th Floor,A-06 Area,No.370,Chengyi Street,Jimei,Xiamen,Fujian,China. 361021
Web: en.four-faith.com
Tel: +86-592-5907276 / 5907277
Fax: +86-592-5912735
ASDU Common Addr Length:
The 101 protocol is generally 1 bytes, and the 104 protocol is
generally 2 bytes.
Infomation Addr Length:
The 101 protocol is generally 2 bytes, and the 104 protocol is generally
3 bytes.
Link Test cycle:
When the link does not interact with the data, it is necessary to send the link test
message regularly to see if the detection link is disconnected.
T1:
control message confirms the timeout and sends the test frame.
T2:
The monitoring message responds to the timeout, sending the S confirmation frame.
T3:
Long time idle timeout, send test frames.
3.3.10 Administration
3.3.10.1 Management
The Management screen allows you to change the F-DPU100's settings. On this page you will find
most of the configurable items of the F-DPU100 code.
The new password must not exceed 32 characters in length and must not include any spaces.
Enter the new password a second time to confirm it.
Note
：
Default username is admin.
It is strongly recommended that you change the factory default password of the F-DPU100,
which is admin. All users who try to access the F-DPU100's web-based utility or Setup
Wizard will be prompted for the F-DPU100's password.
Web Access
This feature allows you to manage the F-DPU100 using either HTTP protocol or the HTTPS
protocol. If you choose to disable this feature, a manual reboot will be required.You can also
activate or not the F-DPU100 information web page. It's now possible to password protect this
page (same username and password than above).
Protocol
：
This feature allows you to manage the F-DPU100 using either HTTP protocol or the
