F-DPU100 Distributed Processing Unit User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 46 of 86
Add: 11th Floor,A-06 Area,No.370,Chengyi Street,Jimei,Xiamen,Fujian,China. 361021
Web: en.four-faith.com
Tel: +86-592-5907276 / 5907277
Fax: +86-592-5912735
3.3.4.4 IPSEC
Connect Status and Control
Show IPSEC connection and status of current F-DPU100 on IPSEC page.
Name:
the name of IPSEC connection
Type:
The type and function of current IPSEC connection
Common name:
local subnet, local address, opposite end address and opposite end subnet of
current connection
Status:
connection status: closed, negotiating, establish
Closed:
this connection does not launch a connection request to opposite end
Negotiating:
this connection launch a request to opposite end, is under negotiating, the
connection has not been established yet
Establish:
the connection has been established, enabled to use this tunnel
Action:
the action of this connection, current is to delete, edit, reconnect and enable
Delete:
to delete the connection, also will delete IPSEC if IPSEC has set up
Edit:
to edit the configure information of this connection, reload this connection to make
the configuration effect after edit
Reconnect:
this action will remove current tunnel, and re-launch tunnel establish request
Enable:
when the connection is enable, it will launch tunnel establish request when the
system reboot or reconnect, otherwise the connection will not do it
Add:
to add a new IPSEC connection
Add IPSEC connection or edit IPSEC connection
Type:
to choose IPSEC mode and relevant functions in this part, supports tunnel mode client,
tunnel mode server and transfer mode currently
Connection:
this part contains basic address information of the tunnel
