F-DPU100 Distributed Processing Unit User Manual
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 47 of 86
Add: 11th Floor,A-06 Area,No.370,Chengyi Street,Jimei,Xiamen,Fujian,China. 361021
Web: en.four-faith.com
Tel: +86-592-5907276 / 5907277
Fax: +86-592-5912735
Name:
to indicate this connection name, must be unique
Enabled:
If enable, the connection will send tunnel connection request when it is reboot or
re-connection, otherwise it is no need if disable
Local WAN Interface:
local addresss of the tunnel
Remote Host Address:
IP/domain name of end opposite; this option can not fill in if using tunnel
mode server
Local Subnet:
IPSec local protects subnet and subnet mask, i.e. 192.168.1.0/24; this option can
not fill in if using transfer mode
Remote Subnet:
IPSec opposite end protects subnet and subnet mask, i.e.192.168.7.0/24; this
option can not fill in if using transfer mode
Local ID:
tunnel local end identification, IP and domain name are available
Remote ID:
tunnel opposite end identification, IP and domain name are available
Detection:
this part contains configure information of connection detection
Enable DPD Detection:
enable or disable this function, tick means enable
Time Interval:
set time interval of connect detection (DPD)
Timeout:
set the timeout of connect detection
Action:
set the action of connect detection
Advanced Settings:
this part contains relevant setting of IKE, ESP, negotiation mode, etc.
Enable Advanced Settings:
enable to configure 1
st
and 2
nd
phase information, otherwise it
will automic negotiation according to opposite end
IKE Encryption:
IKE phased encryption mode
IKE Integrity:
IKE phased integrity solution
IKE Grouptype:
DH exchange algorithm
IKE Lifetime:
set IKE lifetime, current unit is hour, the default is 0
ESP Encryption:
ESP encryption type
ESP Integrity:
ESP integrity solution
