4. Operating Instructions
4.1 Power connection
Connect one end of the power cord to the power port on the back of the
instrument and the other end to the power socket, then turn on power.
4.2. Installation and Removal of Magnetic Rod Sleeves
Installing the sleeves: Insert the magnetic rod sleeves fully into the grooves.
Press the buckle at the end of the sleeve and ensure it is fully inserted
and in position.
Removing the Sleeves. Press the buckle at the end of the sleeve and pull
it out of the groove.
4.3 Installing the deep-well plates
Slide the platform out using the handle. Place the bottom side of the
deep well plates on to the heating pads, aligning the side of the plate
against the two positioning pins ① in the middle. Press down till the
deep-well plates is completely in position and you can hear a
‘click’
sound.
①
②
13
