June 2006
© 2006 Foundry Networks, Inc.
3 - 1
Chapter 3
Installing a FastIron Stackable Switch
WARNING:
The procedures in this manual are for qualified service personnel.
This chapter describes how to physically install the FES, FESX, and FWSX devices.
This chapter contains the following topics:
Information about configuring IP addresses and connecting network devices is in the chapter “Connecting
Network Devices and Checking Connectivity”.
Unpacking a System
The Foundry systems ship with all of the following items. Please review the list below and verify the contents. If
any items are missing, please contact the place of purchase.
Table 3.1: Chapter Contents
Description
See Page
Unpacking the hardware
3-1
Summary of installation tasks
3-3
Installation precautions
3-4
Site preparation
3-6
Installing a redundant power supply
3-6
Mounting the device
3-8
Powering ON the device
3-9
Verifying proper operation
3-9
Attaching a PC or terminal to the Foundry device
3-10