Security Features
June 2004
© 2004 Foundry Networks, Inc.
15 - 3
In tunnel mode, at each IKE end point, the IP traffic to be protected is completely encapsulated with another IP
packet. In this, the inner IP header remains the same as seen in the original traffic to be protected. In the outer IP
header, the source and destination addresses are the addresses of the tunnel end points.
Typically, for a remote user, the source address of the outer IP header is the dynamic public IP address provided
by the ISP. When mode configuration is enabled, the source address of the inner IP header is the private address
allocated by the VPN server to the VPN client.
As in the case of user group method, the administrator creates an IKE policy for a logical group of users such as a
department in an organization. The identity information used to identify each user uniquely is configured in the IKE
policy. The IKE policy is attached to a mode configuration record. The mode configuration record contains an
IPSec policy template to be used for creating dynamic IPSec policy. Also, the record contains one or more pools of
private IP addresses to be used for allocating the addresses to the VPN clients. Besides the private IP address,
the VPN server can also provide WINS and DNS server addresses.
Upon successful IKE authentication of a VPN client, the server checks whether the IKE policy used to authenticate
the VPN client is enabled for mode configuration. If so, the server allocates a private IP address from one of the IP
pools in the mode configuration record to the VPN client. The destination address field in the IPSec template
attached to the user group is filled in with the private IP address allocated to the VPN client and this is installed as
an IPSec policy.
Example 1: Securely Managing the Foundry AR1204 Over an IPSec Tunnel
This example demonstrates how to manage a Foundry router through an IP security tunnel. Steps are presented
for configuring the Router1 and Router2 routers to assist any host on the LAN side of Foundry-2 to manage the
Router1 router through the IP security tunnel.
The security requirements are:
•
Phase 1: 3DES with SHA1
•
Phase 2: IPSec ESP with 128-bit AES and HMAC-SHA1
Figure 15.1
Tunnel Mode Between Two Foundry Security Gateways - Single Proposal
Step 1: Configure a WAN bundle of network type untrusted:
Router1/configure# interface bundle wan1
Configuring new bundle
Router1/configure/interface/bundle wan1# link t1 1
Router1/configure/interface/bundle wan1# encapsulation ppp
Router1/configure/interface/bundle wan1# ip address 172.16.0.1 24
Router1/configure/interface/bundle wan1# crypto untrusted
Router1/configure/interface/bundle wan1# exit
Summary of Contents for AR1202
