ISSUE DATE 07-2015 REV. DATE ------------ REV. LEVEL: - ECO 1-7090 OIPM P/N 8419 PG 4 OF12
The Fostoria FSS-Series heaters provide
safe, efficient electric infrared heat for total
area heating or spot heating applications for
warehouses, steel mills, machine shops and
many other industrial applications They are
ideal for use in high vibration environments.
Using the “L” brackets on the top of the
housing these overhead heaters can be hung
by chain or rigidly mounted They operate
cleanly, emitting no fumes or odors.
Applications where combustible materials and/or
personnel will be located near these heaters must
adhere to the minimum clearance information
below
REQUIRED CLEARANCES
DO NOT install closer than 36 inches to
a vertical surface or 24 inches to a ceiling.
Heaters MUST BE SEPARATED by more than
36 inches and 72 inches from any combustible
surface in direct radiation path (87 inches for
FSS-95 Series).
EXPLOSION HAZARD
FIRE HAZARD
BURN HAZARD
• Serious injury or death may
occur
• Not for residential use.
• Do not use outdoors.
• Use for comfort heating only
• Do not use locations
containing hazardous or
explosive atmospheres
• ETL listed for suspended, high-bay indoor applications (see table on next page)
• High-watt-density radiant heat with 60 degree heat pattern.
• Gold-anodized aluminum housing for good reflectivity and corrosion resistance
• “L-brackets included for chain suspension or rigid-mounting.
• Designed for direct-wire, single or three-phase configurations (see table next page).
SPECIFICATIONS
GENERAL DESCRIPTION & USE
