manualshive.com logo in svg

Fostex VF80, Owner'S Manual

The Fostex VF80 Owner's Manual is an essential guide for operating and maximizing the potential of your VF80 multitrack recorder. You can conveniently download this comprehensive manual for free from our website, ensuring seamless navigation and understanding of your Fostex VF80's features and functionality.

Share
Download
background image

FOSTEX DISTRIBUTORS LIST IN EUROPE

* Including non-EU countries (as of January, 2002).

<ITALY>

NAME: Proel S.p.A.
ADD: Zona Artigianale 64047-Sant’ Omero (Teramo), Italy
TEL: (+39) 0861-81241, FAX: (+39) 0861-887862

<THE NETHERLANDS>

NAME: IEMKE ROOS AUDIO B. V.
ADD: Kuiperbergweg 20, 1101 AG Amsterdam, The
Netherlands
TEL: (+31) 20-697-2121, FAX: (+31) 20-697-4201

<NORWAY>

NAME: Siv. Ing. Benum A/S
ADD: P. O. Box 145 Vinderen, 0319 Oslo 3, Norway
TEL: (+47) 22-139900, FAX: (+47) 22-148259

<PORTUGAL>

NAME: Caius - Tecnologias Audio e Musica, Lda.
ADD: Rua de Santa Catarina, 131 4000 Porto, Portugal
TEL: (+351) 2-2086009/2001394
FAX: (+351) 2-2054760/2087488

<SPAIN>

NAME: Multitracker, S. A.
ADD: C/Garcilaso No.9, Madrid 28010, Spain
TEL: (+34) 91-4470700, 91-4470898, FAX: (+34) 91-5930716

<SWEDEN>

NAME: TTS Scandinavia AB
ADD: Kavallerivagen 24, 172 48 Sundbyberg, Sweden
TEL: (+46) 8-59798000, FAX: (+46) 8-59798001

<SWITZERLAND>

NAME: Audio Bauer Pro AG
ADD: Bernerstrasse-Nord 182, CH-8064 Zurich, Switzerland
TEL: (+41) 1-4323230, FAX: (+41) 1-4326558

<UK>

NAME: SCV London
ADD: 40 Chigwell Lane, Oakwood Hill Industrial Estate,
Loughton, Essex IG10 3NY U.K.
TEL: (+44) 020-8418-0778, FAX: (+44) 020-8418-0624

Declaration of EC Directive

This equipment is compatible with the EMC Directive (89/336/EEC) - Directive on approximation of member
nation's ordinance concerning the electromagnetic compatibility and with the Low Voltage Directive (73/23/EEC)
- Directive on approximation of member nation's ordinance concerning electric equipment designed to be used
within the specified voltage range.

The Affect of Immunity on This Equipment

The affect of the European Specification EN50082-1 (coexistence of electromagnetic waves - common
immunity specification) on this equipment are as shown below.

* In the electrical fast transient/burst requirements, surge, conducted disturbances by radio-frequency fields,
power frequency magnetic field, radiate electromagnetic field requirements and static electricity discharging
environment, this could be affected by generation of noise in some cases.

<AUSTRIA>

NAME: ATEC Audio-u. Videogeraete VertriebsgesmbH.
ADD: Im Winkel 5, A-2325 Velm, Austria
TEL: (+43) 2234-74004, FAX: (+43) 2234-74074

<BELGIUM>

NAME: EML Sound Industries NV
ADD: Bijvennestraat 1A, B3500 Hasselt, Belgium
TEL: (+32) 11-232355, FAX: (+32) 11-232172

<DENMARK>

NAME: SC Sound ApS
ADD: Malervej 2, DK-2630 Taastrup, Denmark
TEL: (+45) 4399-8877, FAX: (+45) 4399-8077

<FINLAND>

NAME: Noretron Oy Audio
ADD: P. O. Box 22, FIN-02631 Espoo, Finland
TEL: (+358) 9-5259330, FAX: (+358) 9-52593352

<FRANCE>

NAME: Guillard Musiques
ADD: ZAC de Folliouses, B. P. 609, Les Echets, 01706 Miribel,
France
TEL: (+33) 472 26 27 00, FAX: (+33) 472 26 27 01

<GERMANY>

NAME: Studiosound & Music GmbH
ADD: Industriestrasse 20, D-35041 Marburg, F. R. Germany
TEL: (+49) 6421-92510, FAX: (+49) 6421-925119

<GREECE>

NAME: Bon Studio S. A.
ADD: 6 Zaimi Street, Exarchia, 106.83 Athens, Greece
TEL: (+30) 1-3809605-8, 3302059, FAX: (+30) 1-3845755

<ICELAND>

NAME: I. D. elrf. electronic Ltd.
ADD: ARMULA 38 108 REYKJAVIK, ICELAND
TEL: (+354) 588 5010, FAX: (+354) 588 5011

Summary of Contents for VF80

















































































































































Reviews:

No comments

Related manuals for VF80

Magnetek IMPULSE G+ Mini Technical Manual preview
IMPULSE G+ Mini
Brand: Magnetek Pages: 182
Saci STM/T10DP Manual preview
STM/T10DP
Brand: Saci Pages: 40
GFA 10003340 00005 Installation Instructions Manual preview
10003340 00005
Brand: GFA Pages: 18
lumishore SUPRA SY225 Installation And Operating Instructions Manual preview
SUPRA SY225
Brand: lumishore Pages: 7
Mesa 8I20 Manual preview
8I20
Brand: Mesa Pages: 41
Asus SDRW-08D2S-U Quick Installation Manual preview
SDRW-08D2S-U
Brand: Asus Pages: 28
Asus Travelair AC Quick Start Manual preview
Travelair AC
Brand: Asus Pages: 9
Asus SDRW-08U9M-U Quick Installation Manual preview
SDRW-08U9M-U
Brand: Asus Pages: 36
YASKAWA S-V Series Safety Precautions preview
S-V Series
Brand: YASKAWA Pages: 32
KB Electronics Penta Power KBRG-212D Installation And Operation Manual preview
Penta Power KBRG-212D
Brand: KB Electronics Pages: 32
Motion SMD 4.0 Series Operation And Installation Manual preview
SMD 4.0 Series
Brand: Motion Pages: 2
Vacon 20 User Manual preview
20
Brand: Vacon Pages: 28
PR electronics 9107 Product Manual preview
9107
Brand: PR electronics Pages: 36
Rexnord Falk Quadrive A Series Owner'S Manual preview
Falk Quadrive A Series
Brand: Rexnord Pages: 53
IBM 10K0001 User Manual preview
10K0001
Brand: IBM Pages: 20
Ricoh MP5308D Manual preview
MP5308D
Brand: Ricoh Pages: 6
Camozzi DRCS Series User Manual preview
DRCS Series
Brand: Camozzi Pages: 20
Baoding Longer Precision Pump WT3000-1FB Operating Manual preview
WT3000-1FB
Brand: Baoding Longer Precision Pump Pages: 18

Brands by name

Popular brands

Load more brands