Light Replacement.
Turn blower and lights off. Make sure the
lights are cool.
Do not remove
the entire fixture (so-
cket) as this is very difficult to reinstall.
Visually inspect the light fixture and esta-
blish whether the unit has a smooth or
“toothed” metal ring.
If smooth remove the glass blocking ring
by prying out with a sharp, soft instru-
ment such as a toothpick.
Steel instruments will scratch the surface.
Be careful that the lens does not fall out.
If “toothed”, place the tip of your finger
between the lens and the ring. Making
your way around the ring, gently pull
outwards until a point is found where the
ring pulls off .
Replace the appropriate bulb. Check par-
ts brochure or specification sheets on
our website. Wipe both sides of the glass
whilst it is out.
13
