The actual temperature of the cassette is shown on the LCD.
It is strongly
recommended not to remove the cassette from the tray until the temperature
decreases to 50°C or less
. If removing the cassette is unavoidable due to specific
reasons (epoxy leak, fiber has broken, etc.), the operator must arrange that there is
no risk of other persons getting too close to the hot cassette and thus avoid
accidental contact.
•
NEVER
touch or put your hands or fingers on the ferrule/plug cassette block
while the heating process has been started or interrupted. Actual temperature
of the ferrule cassette is indicated on the LCD display. Touching the hot
ferrule/plug cassette may result in serious injury.
•
NEVER
detach the cassette from the tray right after finishing the curing
process. Allow enough time to let it cool. Actual temperature of the ferrule
cassette after finishing or interrupting the heating process is indicated on the
LCD display.
WARNING
!
Summary of Contents for OMC-W36
Page 2: ...Blank page ...
Page 6: ...Blank page ...