Foscam FI9808P User Manual Download Page 74

Page: 74 / 96

www

.foscam.com

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

Click Browse and select the parameters file you have stored, then click Submit to restore the restore the parameters.

Figure 4.61

4.9.2 System Upgrade

Your current firmware version will be displayed on your screen. You may go to the

Device Status



Device

Information

Page to check for the latest firmware versions available.

Click

Browse

choose the correct bin file and then click

System upgrade

Make sure you have unplugged the SD

card.
Don’t shut down the power during upgrade. After upgrading, you can see the upgrade result.

Figure 4.62

Upgrade Firmware by IP Camera Tool

Double click the IP Camera Tool shot icon

select the Camera IP that you want to upgrade the firmware. Then

select Upgrade Firmware and enter the username and password, choose the firmware file, and upgrade.

Summary of Contents for FI9808P

































































































Search results

Summary of Contents for FI9808P

Reviews:

Foscam FI9808P, User Manual, Page: 74 / 96

Search results

Summary of Contents for FI9808P

Reviews: