Foscam FI9808P User Manual Download Page 21

Page: 21 / 96

www

.foscam.com

Shenzhen

Foscam

Intelligent

Technology

Co.,

Limited

Tel:

755

2674

5668

Fax:

755

2674

5168

Section 1

FOSCAM Logo/ LiveVideo / Settings/Playback buttons

FOSCAM LOGO

Path to surveillance window. Click this button and back to the surveillance window

Path to Administrator Control Panel, Click it, and it will lead to Administrator Control Panel and do

advanced settings.

Click this button and back to the Playback panel to view the stored audio files stored in the SD

Card.

Section 2

Multi-Device Window

The firmware inside the camera supports up to maximum of 9 cameras being monitoring at the same time. You can add
other cameras in multi-device setting (read chapter 4.2.5).

Figure 3.4

Section 3

Mode/ Stream / Mirror/ Flip buttons

Mode

1) 50HZ ---------Indoor surveillance (Region: Europe, China)
2) 60HZ ---------Indoor surveillance (Region: USA, Canada)

Stream

The default Stream supports four modes: 0/720P/30fps/4M, 1/VGA/25fps/2M, 2/VGA/ 15fps/ 1M and 3/

Summary of Contents for FI9808P

































































































Search results

Summary of Contents for FI9808P

Reviews:

Foscam FI9808P, User Manual, Page: 21 / 96

Search results

Summary of Contents for FI9808P

Reviews: