PRODUCT SAFETY INFORMATION
ENVIRONMENTAL MAXIMUMS
Do not operate the consoles if the humidity and ambient temperature cause condensation on the product;
allow the product to dry first before connecting to the mains.
DO not operate at ambient temperatures higher than 104°F (40°C).
ELECTRICAL SAFETY
The controller must be connected to protective earth (PE) when energized.
Do not use the product if the mains inlet is damaged.
Do not expose the product to rain or moisture.
ALWAYS disconnect from the power before servicing or replacing the fuse. Replace it with the same fuse size
and type.
Do not use the product if the mains system is not in accordance with the below information.
Do not open the product while connected to mains unless qualified to do so.
POWER CONSUMPTION
Power Consumption: 85W
Currents Input: 100-240VAC, 2.5A
Frequency: 50-60Hz
Button Cell BATTERY
The product motherboard contains a Lithium-Ion button cell (CR2032) for time data retention.
This battery is used to maintain time data when the product is not powered, this battery will need to be replaced at least
every five years. If the product is mostly off for long periods or in cold environments, then it may need an earlier
replacement.
Recycle the CMOS battery in accordance with local law.
Please be aware that Lithium-Ion button cells are a particular danger to small children.
TOUCH SENSOR GLASS SAFETY
Do not operate the console if the touch sensor is broken as glass particles may be released by the sensor.
Caution!
There are no user-serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the
unlikely event your unit may require service, please contact your local dealer.
Suggestion for Power Supply
We strongly suggest you connect with the UPS power supply to avoid any power cut accident during programming.
Please read these instructions carefully. They include
important information about the installation, usage and
maintenance of this product.
