Forza 00910, Manual

Page: 7 / 20

7
3. MECANIC PART
3.1 User manual
1- Make sure that the spinde is perfectly cleaned and greased.
2- Check that shaft is punched. Otherwise use a point protector.
3- See that arms are evenly spread.
4- Wear all necessary safety equipments.
5- Hold the equipment steady by tightening the spindle manually.
6- Put pressure with the pump while always monitoring the gauge and the puller
deformations alike.
DO NOT USE POWER TOOLS
NOTE: Pumps can deliver up to 700 bars, for additional safety DO NOT operate
with pressure beyond the red zone whnusing pullers.
3.2 Technical features
The hydraulic sets contain the necessary parts to put together several pullers.
The various hydraulic pullers sets’ compositions are available in our catalogue or web
page www.forza.es.
Essentially the sets contains:
- Push pullers series 1110H.
- Spliter series 1200.
- Standard or self-centering 2 & 3 arms pullers.
- Interior pullers series 1500H.
When the extractors are mounted sometimes they are not perfectly centered, this
causes asymmetry in loads on the jaws.